JP. JP AdventurAir SE 3DS 2023 12’0″x36″x6″

JP AdventurAir SE 3DS 2022 12’0″x36″x6″

EXPANDING FRONTIERS

The Adventurair can do it all – windsurf, white water paddling, fishing and touring. The Scotty mounts for fishing rods, the mast plug for windsurfing, the wide array of bungee straps, D-rings and handles, Adventurair has it all! The quad setup with four 3″ short soft fins is there for those shallow river pockets or white water action. You can add the middle fin for added traction and a center fin for better upwind performance while windsurfing. The Tail Rail Edge enhances the performance of the boards by allowing a quick water release.

The AdventurAir comes with 1x 9″ fin, 1x 10″ fin, 1x Double Action Pump and 1x Adventure Edition Roller Bag.

---

Key Features:

• Tail Rail Edge
• Welded Seam Technology
• Bungee rope
• Scotty Mounts
• Windsurf Mastplug
• Center fin

---

FEATURES:

---

---

---

---

---

Technology:

1. Rail
   The outside rail layer is glued over the first layer for added stiffness and abrasion resistance.
2. Triple Layer Composite Drop Stitch
   The 2 PVC layers make sure your JP Inflatable is 100% airtight, and the Polyester 1000D fabric in between them creates a super durable composite stretch-resistant structure.
3. Inner Rail
   The first rail layer is welded to the DS fabric to ensure a long-lasting mechanical bond.
4. 3D Stringer
   The 3D stringer is the most innovative solution to increase the stiffness of an inflatable board. It connects the deck, rail and bottom into one strong and solid U-beam. This has increased the stiffness of the boards up to 30%. Furthermore, the 3D Stringer increased the glued overlap surface in the high high-stress standing area, increasing the safety of the boards.
5. Welded Seam Technology
   JP-Australia developed the Welded Seam Technology to increase the durability and airtightness of our inflatable boards. The connection between the rail and the drop stitch material is hot-air welded thus creating a very strong mechanical joint that turns these two parts into one. By fusing two different layers together into one part, the welding process makes the board safer and more durable. The plasticizers in PVC migrate over time and weaken the strength of the chemical bond of the glue.
6. Pre-Lamination
   Our Triple Layer Composite and our Double Layer constructions both include the specially developed process of pre-lamination. This high-tech process consists of machine-lamination of the multiple layers into a shell that has accurate thickness as well as superior abrasion and stretch properties. Compared to normal double layer boards we have been able to remove the manual glue application from the process and with it the room for error, the excess weight of the glue and the additional health hazards for our workers. The fiber-reinforced layers create super strong and durable boards with a minimal amount of stretch.

---

Details: